Create a Wildlife Pond

A Pond is the Single Most Wildlife-Friendly Addition to a Garden

Sep 27, 2008

A wildlife pond is an excellent addition to a garden. Frogs will eat common garden pests like slugs. Birds like robins and blue tits will appreciate the insect activity.

An organic garden needs wildlife to control pests, and a wildlife pond is organic gardening with an attractive side-effect! Ornamental fish do not belong in a wildlife pond – their waste is toxic to some of the other wildlife and goldfish for instance eat dragonfly eggs, toad eggs and other welcome visitors.

Planning the Wildlife Pond

The first stage is planning, both scale and where to put it. Do not site it over cables or other services. Most pond plants and fauna prefer sun and warmer water so avoid too much shade. However, if the pond is small (2m x 2m or less) then a sunny location will mean greater evaporation. The pond should have a shallow gradient on one side to allow birds to drink safely and creatures like hedgehogs that may fall in at least some change to get out. The deepest part of the pond should ideally be at least 60 cm. The profile should be curved, with a range of depths. Most of the wildlife occupies the shallower parts but the depth is needed to give an ice-free refuge in winter. Check available widths of pond liner before committing to this stage. Choosing a readily available size will make the best use of the liner. As a rule of thumb the length of the liner is the length of the pond plus twice the maximum depth of the pond.

Digging and Levelling the Pond

Once the size and location are determined it is time to lay out the outline with rope, and start digging. Two people can dig a small pond about 2m x 2m and about 80cm deep in a day. If something larger is planned then getting a group of friends together for a pond digging party will make things easier, or alternatively if a vehicle can be got onto site then a digger can be hired. If the site is not level then some of the spoil from the hole can be used to build up the low side, otherwise it needs to be spread in the rest of the garden. For a cheap and easy level a length of translucent garden hose can be used in a U shape inside the pond hole. Filled with water to the level of the ground on one side, the water will find the same level on the other. In this way even a large pond can be levelled without the fuss of laser levels and the like.

Digging by hand is hard work, particularly in heavy soils. It can be done using a spade, though a mattock or pickaxe makes it a lot easier to break up compacted soil.

Lining the Pond

Butyl or PVC pond liner is the easiest way to make the pond waterproof. Remove sharp stones from the hole and use about a 5cm layer of sand to further protect the liner – for a small pond old newspaper can serve instead. Lay the liner over the hole ensuring enough overlap on the edges and fill the pond with water, which will settle the liner. Leave this to settle overnight, and then weight down the edges with slabs.

To finish off, either cut a slit in the earth about 4cm below the waterline and tuck the excess liner into the slit so made, or use slabs, but if slabs are used then a ramp allowing creatures to access the pond is needed.

The copyright of the article Create a Wildlife Pond in Organic Gardens is owned by Richard Mudhar. Permission to republish Create a Wildlife Pond in print or online must be granted by the author in writing.